Fábrica inteligente
Producción, energía y servicios auxiliares en una sola vista
Producción, montaje y embalaje, materias primas y producto terminado, aire comprimido, salas eléctricas, oficinas y entorno exterior se reúnen en una vista espacial. Los responsables pasan de la zona al estado, las señales y los eventos para organizar inspección, colaboración y recepción.

La solución sigue zona espacial—estado del equipo—escenas—colaboración. No sustituye PLC, enclavamientos, protecciones ni control de proceso. Las órdenes se habilitan después de validar en campo protocolos, permisos, condiciones de enclavamiento y comportamiento ante pérdida de red.
Base de diseño|espacio de demostración de las capturas
Las cifras de zonas y entidades proceden de la interfaz existente. Cantidades, pasarelas y lista de puntos se confirman con el inventario, registros, cableado y topología de red del sitio.
01 · Arquitectura unificada desde la zona hasta el punto
Primero se localiza en el espacio y después se abren equipos, señales y escenas, manteniendo clara la ubicación de cada dato.
02 · Producción y montaje: señales junto al puesto de trabajo
Desde la vista general se entra en producción o montaje/embalaje para comprobar entidades, estados y fuentes. Las cifras de producción y potencia son ejemplos de interfaz.




03 · Gestión energética: del total a la zona, al equipo y a la unidad producida
Electricidad, agua, aire comprimido y cargas auxiliares se submiden por niveles. El consumo se consulta por planta, taller, línea, equipo, turno y periodo, cerrando el ciclo entre detección, análisis de causa y verificación de mejoras.
Review lighting, standby loads and time schedules for factory auxiliary systems in one place, with human confirmation before execution.
Review equipos feedback, station status and open items by workshop and assembly zone.
Use schedules for non-critical auxiliary loads such as site lighting. Critical equipos is excluded from default actions.
Organize lighting and environmental equipos by zone for quick field verification.
Un libro energético responde cuatro preguntas clave
Cuánto se usa, dónde se concentra, cuándo aparece una anomalía y si el consumo realmente bajó tras la mejora. Las comparaciones utilizan mediciones del mismo alcance y periodo, sin presuponer porcentajes de ahorro.


04 · De la detección a la revisión: una inspección trazable
Convertir “estado visto” en tratamiento asignado y resultado registrado.
Equipos-feedback incident
Run and stop feedback disagree, or a machine fault field changes.
Utility or environmental incident
Aire comprimido, water leak, presence detection or lighting status becomes abnormal.
05 · Ordenador y móvil: el mismo lenguaje espacial
El ordenador sirve para visión general y comprobación de puntos; el móvil para inspección en campo. Zonas, escenas y nombres de equipos permanecen iguales.
06 · Lista de configuración|implantación según interfaces y sitio
Los modelos desconocidos quedan en blanco. Las cantidades expresan una base de configuración o dependencia de interfaz; las entidades de las capturas no son cantidades de compra.
Plataforma y comunicaciones
| Nombre del producto | Modelo | Cantidad | Configuration use and selection reason |
|---|---|---|---|
| Enterprise IoT whole-site control hub gateway | HAI04 | 1 conjunto | Unified entry point for factory spaces, devices, states, scenes and mobile views; suited to wired-network deployment. |
| HA01 professional smart controller | HA01 | 1 conjunto, selected per project instead of HAI04 | Supports Modbus, RS485, RS232, dry contacts and HA Wi-Fi for projects requiring multiple interface types. |
| 128-point Modbus-to-HA gateway | HAMHB128 | Size by 128 points per gateway and total points | Aggregates Modbus points from PLCs, meters and controllers. Verify actual capacity against polling interval and register count. |
| 64-point Modbus-to-HA gateway | HAMHB64 | As required for smaller zones | Suitable for an independent workshop or utility room, avoiding concentration of every point on one link. |
| Serial-to-network TCP/MQTT gateway | HA-WF485 | Size by number of RS485 buses | Connects field RS485 devices to the IP network for cross-zone aggregation and maintenance. |
| RS485/RS232 network conversion module | HADTU439S | Size by serial device group | Connects serial devices through TCP, MQTT, UDP or HTTP. Verify field protocol and network policy before deployment. |
Interfaces de producción y montaje
| Nombre del producto | Modelo | Cantidad | Configuration use and selection reason |
|---|---|---|---|
| Single-channel DI dry-contact input module | HA DI01 | Cantidad of run / stop / fault contacts required | Converts dry-contact states from original equipos into platform points, preferably read-only without changing machine logic. |
| Integrated magnetic temperature and vibration sensor | HA JTZ01 | As required for critical motors, fans, pumps and rotating equipos | Captures temperature and vibration trends where equipos health cannot be read directly. |
| 0–450°C wall-mounted high-temperature sensor | HA JTS01 | As required for high-temperature equipos or process points | Captures process-temperature trends near drying, heating or hot surfaces. |
| Smart infrared temperature probe | HAWTS500 | As required where contact measurement is impractical | Provides non-contact temperature data for moving parts or points unsuitable for wired contact sensors. |
| Color-recognition and sorting industrial-vision sensor | HA RGBCS03 | As required at sorting stations | Supports color recognition and sorting-position assistance. Use for quality decisions only after process validation. |
| 10 mm displacement sensor | HADS50 | As required for displacement or in-position detection | Provides measurable feedback for fixtures, stations or mechanisms; the range must match the field movement. |
| 24-circuit high-power 16 A relay module | HA-M24162 | As required for auxiliary-system circuits | Central control for non-critical auxiliary circuits such as lighting. Production and safety-critical loads are excluded by default. |
Servicios, energía y ambiente
| Nombre del producto | Modelo | Cantidad | Configuration use and selection reason |
|---|---|---|---|
| 0–1 MPa Modbus pressure transmitter | HAPS03 | At least one main-pipe point; add critical branches as required | Measures compressed-air main and branch pressure. Confirm range, connection size and thresholds on site. |
| Split duct air-speed and airflow transmitter | HA JFS01 | As required for exhaust or supply ducts | Captures factory ventilation and equipos-exhaust status. Confirm duct size, straight-run requirements and range. |
| High-accuracy differential-pressure transmitter | HA JPDS01 | As required for filters, clean areas or ducts | Tracks filter and zone differential pressure without replacing original process protection or interlocks. |
| Smart three-phase energía meter | HA-EM02 | As required for main distribution and critical three-phase circuits | Collects voltage, current, power and cumulative energía for workshop and utility submetering. |
| Single-phase 2P smart meter with RS485 | HA EM14 | As required for office, lighting and other single-phase circuits | Adds single-phase submetering. Remote switching is enabled only after permissions and electrical design are confirmed. |
| Ultrasonic flow meter | HA-UF600 | As required for critical cooling-water or process-water pipes | Clamp-on measurement simplifies retrofit. Confirm pipe material, diameter and straight-run conditions before installation. |
| Seven-in-one air-quality monitor | HA-AIR7S | As required for offices, duty rooms and critical workshops | Combines temperature, humidity and multiple air-quality indicators for environmental dashboards and ventilation reference. |
| Noise sensor | HA-NS01 | As required for high-noise workshops or the site boundary | Supports noise trends and inspection records; determine placement from the field sound environment. |
| Photoelectric smoke alarm | HA SD05 | As required for auxiliary monitoring points outside fire-system linkage | Provides an auxiliary smoke-status input and does not replace the legally required fire-alarm system. |
| High-mount presence sensor | HA-MBS42 | As required for high-bay workshops, warehouses or passages | Provides presence status for lighting and inspection scenes. Verify mounting height and coverage on site. |
| People-counting and presence sensor | HA-MBS51 | As required at main entrances | Provides zone occupancy and presence reference for offices, warehouse entrances and evacuation-support dashboards. |
| Two-channel 0–10 V dimming and speed-control module | HA-PD102 | As required for lighting or auxiliary variable-speed circuits | Adjusts non-critical lighting and fans through analog signals; verify load interface and loss-of-connection behavior. |
| Single-channel 20 A socket module | HA-R116 | As required for office and auxiliary-equipos sockets | Controls and monitors authorized auxiliary sockets; not for production machines or safety-critical loads. |
Si cambian las condiciones, también cambia la lista
Marcas, protocolos, circuitos, aislamiento de red y controles existentes afectan pasarelas, módulos, puntos y obra. Las alternativas no se suman; mandan la visita y la lista de puesta en servicio.
07 · Entrega y aceptación|cerrar con resultados verificables
La entrega no es solo publicar páginas: fuentes, rutas de anomalía y reglas sin red deben poder comprobarse.
-
Spaces and naming
Map all eight zones, equipos names, owners and permissions. -
Comunicaciones y puntos
Verify protocol, unit, read/write direction, refresh cycle and source point by point. -
Production and assembly commissioning
Compare run, stop, fault and cumulative values with original equipos screens. -
Energy and compressed-air commissioning
Compare main and submeter readings, equipos power, energía, flow, pressure and totals; establish equivalent shift, daily and monthly energía baselines. -
Mobile inspection
Mobile zone filters, device cards and scene names match the desktop view. -
Document handover
Deliver point schedules, network topology, energía-metering hierarchy, report definitions, permissions, change records and training records.
After original equipos state changes, the platform matches within the agreed refresh cycle.
Each incident records its zone, point, time, owner and response result.
Main and submeters close within the agreed tolerance; unit-product energía can be verified when shift and output data use the same basis.
Record behavior after network loss, reconnection and device restart.

